Content Table
How to paint trim and baseboards is an important skill to acquire; using the right method coupled with the right paints can breathe fresh life into your home. Painting baseboards and trims give your rooms an appearance of freshness and cleanliness that will transform every room. This type of aesthetic improvement is essential for all homes, professional interior painters offer this service to maintain the structural integrity of your property.
What Is the Best Baseboard Paint?
Baseboard paint selection is a critical part when embarking on this type of DIY project. Beyond the color, the type of paint used is important to ensure the best results. The two types of paints you can choose are either oil-based or water-based paint. Oil-based paints tend to be more durable and require one coat of paint.
On the other hand, a more popular option, especially for DIY painters, is water-based paints such as latex paints; these are less toxic and dry at a much faster rate than their oil-based counterparts. When painting baseboards, it is recommended to use semi gloss paint as it is more durable, damage-resistant, and easier to maintain.
Paint Brushes and Other Materials Needed
Gathering the right paint brushes and materials is a crucial step in preparing baseboards for painting.
Tools:
- Bucket
- Paint tray
- Sponge
- Protective equipment such as eye protection, a mask, and gloves
- Sandpaper or sanding sponge
- Drop cloth
- Putty knife
- 2-inch sash brush
Materials:
- Primer paint
- Semi-gloss latex paint or oil-based paint
- Painter’s tape
- Caulk and caulk gun
- Spackle
It is important to note that if you opt to use a latex or water-based paint you equip yourself with a poly-nylon brush whereas if you choose an oil-based paint, it is best to choose a natural-bristle brush.
Do I Need to Remove Baseboards or Leave them in Place When Painting?
Among the many tips for painting baseboards, it is recommended to leave the baseboards in place when painting them. However, in some situations, it can be more convenient to remove the baseboards to paint them separately.
When to Remove Baseboards
In new homes where the baseboards have not yet been installed, it is recommended to paint the baseboards separately before putting them up. In recently remodeled homes or relatively new homes, the baseboards should also be removed when painting, as this will improve the quality of the final product. In newer homes, baseboards are easily removed without causing damage; so, for the best results, it is optimal to remove them and paint them apart, and once fully dry, put them back up. In this case, you must also be ready for minor touch-ups post installation which is perfectly normal.
When to Leave Baseboards in Place
In older homes, removing baseboards before painting them can have unintended consequences, ripping the baseboard out could cause damage to the wall that may be hard to repair. It also looks better and is easier in older homes to just keep the baseboards in place when painting them. It is less time-consuming and may not affect the result.
9 Steps for Painting Baseboards and Trims
Following basic steps on how to prep baseboards for painting will dramatically improve the project interior painting and the result thereof.
Step 1: Clean Previously Painted Baseboards
This step is critical, once the room is properly prepared it will make painting baseboards and trims a lot easier.
- Start by laying down a drop cloth onto the floor to protect it from drips of paint.
- Take a few moments to inspect the baseboards and trims to see if any imperfections need to be fixed.
- Use a damp cloth to wipe down the baseboards and trims before painting them.
- Make sure to give them ample time to dry fully.
Please note that the floor beneath the baseboards must also be vacuumed and dust free.
Step 2: Patch Gouges and Nail Depressions
It is important to not skip this step because this will directly affect the quality of the result.
Once you have found any imperfections, holes, dings, or nail depressions; push them into the baseboards or remove them. This will leave you with holes that then can be filled. This is a key step on how to paint baseboards and trims.
Step 3: Fill Holes with Spackle
Once the nails have been recessed into the wood, it is time to use a spackle compound and putty knife to fill the holes. Large holes or nail depressions must be filled whereas smaller holes that are barely noticeable can be left untouched. (They will be filled with the paint once the baseboard or trim is painted). It is okay to use more because they can shrink into the baseboard and the trim.
Step 4: Lightly Sand
Sanding baseboards and trims before painting them is the best way to ensure that your project yields a successful result.
- When sanding your baseboards start with 80-grit sandpaper then move onto 120-grit sandpaper for a smooth finish.
- If the baseboard or trim is relatively new, it is best to just use 120-grit paper to not damage the surface of the baseboard.
- Folding sandpaper can be a nifty little trick to reach the hard-to-reach places of the baseboard.
- Once your baseboards and trims have been sanded, use a damp cloth to wipe down any residual dust or debris.
Step 5: Tape Off the Floor and Wall
How to tape baseboards for painting is a step that will ensure that the walls above the baseboards and the floor beneath the baseboards and trims don’t get damaged by splashes of runaway paint.
- Use painter’s tape along the wall that meets the baseboard or the trim.
- Apply additional painter’s tape onto the floor where the wall meets the baseboard. If your floor is carpeted, use packing tape to compress the fibers that are next to the baseboard.
- When applying the painter’s tape make sure you get it as close to the baseboard or the trim as possible.
- You can also use wider painter’s tape or add another layer of it to give yourself more wiggle room when taping your baseboard.
Step 6: Prime the Baseboards
A primer coat is essential when painting any surface, but it is a significant step on how to paint trims or baseboards.
- Take a painting stick and thoroughly mix the primer paint to make sure there are no clumps.
- Gently dip the brush into the paint without overloading it, otherwise much of the paint will run and drip and this will make clean-up more challenging.
- It is important to paint horizontally in uniform strokes when painting baseboards and trims.
- Avoid lap marks by constantly painting over previously painted areas before they dry.
- Let the primer dry thoroughly, it is important to follow the instructions given by the manufacturer before continuing on the next step.
Step 7: Start Painting
The following steps are tips for painting baseboards and trims that are useful and ensure that your painting project is a success.
- It is important to stir your paint before use and if it has been sitting for a while then it is recommended to return it to the store so they can either replace it or shake it so the paint will be smooth and fresh.
- Make sure to put the lid of the paint can far away from your workstation so you don’t accidentally step on it or splash paint around.
- Keep in mind when painting to not overload your paintbrush and only dip it into the paint less than halfway in as to not cause unnecessary drips or spillage.
- When applying the first coat of paint, use less paint since applying the second layer will give your baseboards and trims that shine.
- Paint horizontally in long and even strokes.
- Same as with the primer make sure to avoid lap marks by keeping the area of the baseboard you have just painted wet.
- Let the paint fully dry for at least a day or as per the manufacturer’s instructions.
- Apply a second richer coat.
- Let the paint dry thoroughly.
Make sure in between coats that you store your paintbrush in a dry and cool place and that your paint is sealed off properly so as to not dry out.
Step 8: Remove the Tape
Paint will take a full day to dry, it is always the best option to follow the manufacturer’s instructions. Once the paint is dry, you can slowly remove the tape. At this stage, it is crucial to remove it carefully to not damage the painted baseboards or trims.
Step 9: Clean Your Tools
When cleaning brushes, containers, and buckets that you want to keep, it is important to use soap and water to wash all the paint out while it is still fresh.